Jump to content

How to Setup the MIDI Outputs to Virtual Instrument


Recommended Posts

1. Create few IAC ports in the 'Audio MIDI Setup' app:

 

audio-midi-setup.png

2. Go to your virtual instrument, load an instrument and chose the port 1:

kontakt2.png

 

3. In Opusmodus composer panel type (midi-destinations) and evaluate the function:

(midi-destinations)

 

Note: We use the MIDI-DESTINATION function for reference only.

The output will look something like that:

=> ((0 . "Bus 1") (1 . "Bus 2") (2 . "Bus 3") (3 . "Bus 4")
    (4 . "Bus 5") (5 . "Bus 6") (6 . "Bus 7") (7 . "Bus 8")
    (8 . "Bus 9") (9 . "Bus 10") (10 . "Bus 11") (11 . "Bus 12")
    (12 . "Bus 13") (13 . "Bus 14") (14 . "Bus 15") (15 . "Bus 16")
    (16 . "Session 1") (17 . "Keyboard") (18 . "MIDI OUT")
    (19 . "UM-ONE") (20 . "Kontakt 5 Virtual Input”))

 

4. In the DEF-SCORE in the instrument section add the same port you have assigned to the Virtual Instrument.

Note: Opusmodus port numbers are 0-based.

(def-score goldberg-var7
           (:key-signature '(g major)
            :time-signature '(6 8)
            :tempo '("al tempo di Giga" e 155)
            :layout (piano-solo-layout 'rh 'lh))
  
  (rh :omn rh
      :port 0
      :channel 1
      :sound 'gm
      :program 0)
  
  (lh :omn lh))

 

Or, you could use the port name if you prefer:

 (rh :omn rh
      :port "Bus 1"
      :channel 1
      :sound 'gm
      :program 0)
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By HenryT
      Hello!
       
      I have been trying the new MIDI Entry system. Data can be seen in Opusmodus as long as a key is pressed, but vanishes when key is released. Note values seem to stick, but not note names, attributes or volumes.
       
      My keyboard is M-Audio Keystation 88 Pro. In MIDI Monitor I can see that this keyboard does not send note off messages, but instead note on with zero value when key is released. I guess that this is normal behaviour in any keyboard. Anyway, this second note on wipes off the data that came in with the first note on.
       
      I appreciate any suggestions that might help!
       
      Best wishes,
       
      Henry
    • By born
      Is it possible to use display-midi in combination with?
      Achim
    • By JulioHerrlein
      Dear friends,
       
      I managed to make my USB controller Keystation 32 to work in Opusmodus. It´s working. I press the keys and the blue notes are appearing in the score. I think that the hardware setup is properly set up.
      The problem is how to use this Midi Entry. 
      The notes are appering but, in order to maintain the notes written I have to disable midi entry. When I enable it back, the new notes inputed erase the old ones. 
      I use this small M-AUDIO keystation 32 keyboard in my desk just to input notes in notation programs. This dont have a sustain pedal attached in this tiny keyboard and no pitch wheel as well. There is some workaround or some keystroke in the computer keyboard to change the input behaviour, to act like the sustain pedal or pitchwheel command ? Actually I can program some way of sending this midi messages using another software but it would better to have it in a keystroke inside opusmodus. 
       
      Thanks. Looks promising !
      Best,
      Julio
×
×
  • Create New...